tec3/IP400
1
0
Fork 0
mirror of https://github.com/adrcs/ip400.git synced 2025-07-08 04:35:45 +03:00
Code Issues Projects Releases Packages Wiki Activity Actions

added utils

Browse source
This commit is contained in:
adrcs 2025-01-29 11:17:14 -07:00 • committed by GitHub
parent a9a3f739b4
commit a9b13d2c39
No known key found for this signature in database
GPG key ID: B5690EEEBB952194
85 changed files with 9213 additions and 0 deletions
Download patch file Download diff file Expand all files Collapse all files

67
rpi/eeprom/STMwl33.txt Normal file
View file

@ -0,0 +1,67 @@
########################################################################
# EEPROM settings text file
#
# Edit this file for your particular board and run through eepmake tool,
# then use eepflash tool to write to attached HAT ID EEPROM
#
# Tools available:
# eepmake Parses EEPROM text file and creates binary .eep file
# eepdump Dumps a binary .eep file as human readable text (for debug)
# eepflash Write or read .eep binary image to/from HAT EEPROM
#
########################################################################
########################################################################
# Vendor info
# 128 bit UUID. If left at zero eepmake tool will auto-generate
# RFC 4122 compliant UUID
product_uuid 00000000-0000-0000-0000-000000000000
# 16 bit product id
product_id 0x0001
# 16 bit product version
product_ver 0x0002
# ASCII vendor string (max 255 characters)
vendor "Alberta Digital Radio Communications Society"
# ASCII product string (max 255 characters)
product "IP400 E04 HAT Rev A"
########################################################################
# GPIO bank settings, set to nonzero to change from the default.
# NOTE these setting can only be set per BANK, uncommenting any of
# these will force the bank to use the custom setting.
# drive strength, 0=default, 1-8=2,4,6,8,10,12,14,16mA, 9-15=reserved
gpio_drive 0
# 0=default, 1=slew rate limiting, 2=no slew limiting, 3=reserved
gpio_slew 0
# 0=default, 1=hysteresis disabled, 2=hysteresis enabled, 3=reserved
gpio_hysteresis 0
# If board back-powers Pi via 5V GPIO header pins:
# 0 = board does not back-power
# 1 = board back-powers and can supply the Pi with a minimum of 1.3A
# 2 = board back-powers and can supply the Pi with a minimum of 2A
# 3 = reserved
# If back_power=2 then USB high current mode will be automatically
# enabled on the Pi
back_power 1
########################################################################
# GPIO pins, uncomment for GPIOs used on board
# Options for FUNCTION: INPUT, OUTPUT, ALT0-ALT5
# Options for PULL: DEFAULT, UP, DOWN, NONE
# GPIO FUNCTION PULL
# ---- -------- ----
setgpio 10 OUTPUT NONE # BOOT_ENA
setgpio 11 OUTPUT NONE # RESET
setgpio 14 ALT0 DEFAULT # TXD0
setgpio 15 ALT0 DEFAULT # RXD0