mirror of
https://github.com/adrcs/ip400.git
synced 2025-07-02 02:01:18 +03:00
18 lines
982 B
Markdown
18 lines
982 B
Markdown
# Documentation
|
|
|
|
This folder contains the recent documentation for the following:
|
|
1) IP400 Nucleo CC2 Experimenter node
|
|
2) IP400 Pi HAT Mini Node
|
|
3) IP400 SPI Specification
|
|
4) IP400 Node Software
|
|
5) Remote Power Kit Assembly Tips and Hints.
|
|
|
|
The two node types, teh Nucleo and Mini-Node, both run the same firmware so the functionality is the same. The hardware differences are highlighted in the
|
|
relevant documentation.
|
|
The SPI specification describes the protocol for frames sent and received using the SPI interface, there is code to manage it on the SD card image, which
|
|
can be found on the IP400 project website, under hardware and 'getting started'.
|
|
The remote power kit assembly is a step-by-step set of instructions to assemble to power adapters. These are reasonably simple to assemble and can be done in
|
|
less that an hour.
|
|
|
|
WARNING: The regulator on the node gets hot, try not to touch it and ensure that it has adequate ventilation. A heatsink may be a good addition.
|